[acroflyrgirl]

I put these on and see they are showing these cracks. Is that normal? Both mains have the same small cracks running along the centers. They are about a year old and I ordered them from Spruce.

 

[SmilingJack]

Looks more like "scuffs" then cracks.

Usually you see that happen on rough runways.

You have a lot of tread left so it doesnt appear to be an issue.

Just make sure none of the "scuffs" are not "cuts".

If a cut goes to deep then you have a problem....

 

[acroflyrgirl]

A/S

Maybe my anti skid is INOP. Maybe it was never installed. I'll have to look in the mx logs.

 

[texdog]

Tires

When it happened to me, tire pressure to low. Desser says 40 PSI plus and you won't get these cuts. I did that and I haven't had any since. I know the PSI is higher than Van's says but if you don't get a shimmy more is better. I run 45 in my RV6A all the time. It works for me.

 

[acroflyrgirl]

Patriot

Unlike the Patriots, I am an over-inflater. I run 45 psi. I'm told it builds character too.