[TXFlyGuy]

Need help in locating the following:


4 ? 10m x 1.50 x 50mm alloy steel bolts

4 ? ?? nuts and 8 washers

2 ? 8m x 1.25 female rod ends

Thanks!

 

[digidocs]

McMaster-Carr has metric rod ends, and I imagine the fasteners as well. (www.mcmaster.com/)

Hope that helps.
David

 

[JonJay]

Maryland Metrics
http://mdmetric.com/index.html?gclid=COHxoeOh2soCFcVffgodT-MPnQ

 

[TXFlyGuy]

I'm in Tokyo right now, and my brother in law is on his way to my hotel with the parts in question.

If for some reason these do not work, I will research the links above.

Thanks!

 

[BillL]

I'm in Tokyo right now, and my brother in law is on his way to my hotel with the parts in question.

If for some reason these do not work, I will research the links above.

Thanks!

Tokyu Hans to the rescue!

 

[JonJay]

Great. Not knowing your application, ISO standards are a bit different than AN and MS if it is for an aircraft.

 

[TXFlyGuy]

Great. Not knowing your application, ISO standards are a bit different than AN and MS if it is for an aircraft.

I was told to get alloy steel. It is for a hydraulic actuator for our inner gear doors.

 

[az_gila]

Markings

Metric bolts are conveniently marked with their strength on their heads.

http://www.engineeringtoolbox.com/steel-bolts-metric-grades-d_1428.html