rv9aviator
Well Known Member
I am needing to make the two small 5/8 inch by 3 inch (F-601P) spacers to fill a gap between the firewall skin and related parts. The print (DWG 19) says to use .063 2024-T3 alclad aluminum. Does any remember what stock they cut these from? The only material I have that is .063 and is just flat sheet is two pieces 3-7/8 by 11 inches. I didn't find any 5/8 wide small strips and am afraid if I use one of the bigger pieces I will find out later they were meant for something different.