gblwy
Well Known Member
After lots of investigation I am still plagued with brake problems. After resealing everything with Loctite 567, the problem seems to be confined to the right brake on the co-pilot side. This fades rapidy after bleeding, then minimal use (on the ground). No fluid leaks, but somehow air is getting into the system.
With significant difficulty I have managed to remove the master cyclinder and have asked Vans for advice. I don't know how I am going to reinstall a replacement/repaired unit without removing the whole brake pedal assembly.
Looking elsewhere in the forum, I see builders of other Vans models have also had difficulties with Matco units. Matco does provide product assembly details on their website. Anyone experienced problems with RV-12 brakes? If so, how did you solve?
Thanks...Keith
With significant difficulty I have managed to remove the master cyclinder and have asked Vans for advice. I don't know how I am going to reinstall a replacement/repaired unit without removing the whole brake pedal assembly.
Looking elsewhere in the forum, I see builders of other Vans models have also had difficulties with Matco units. Matco does provide product assembly details on their website. Anyone experienced problems with RV-12 brakes? If so, how did you solve?
Thanks...Keith