Michael Burbidge
Well Known Member
I'm about to match drill the master brake cylinders to the rudder pedals. The drawings and directions show nothing about where the neutral position of the brake pedal should be in relation to the rudder pedal. In looking at several builders sites it looks like people make the brake pedal parallel with the surrounding rudder pedal tubing. i.e. lay in the same plane (geometrically speaking) Am I correct on this?
The other question I have is the master cylinders come with plugs in the connection holes. Is there fluid in the master cylinder? How do I know that the shaft is fully extended, before I match drill? Do I have to take the plugs out to make sure the shaft is fully extended?
Thanks,
Michael-
The other question I have is the master cylinders come with plugs in the connection holes. Is there fluid in the master cylinder? How do I know that the shaft is fully extended, before I match drill? Do I have to take the plugs out to make sure the shaft is fully extended?
Thanks,
Michael-