RickWoodall
Well Known Member
I have been searching the archives and cant find the info that I recall seeing a while back.
I have the vans MAP hose and firewall kit but am using both Dynon skyview and Lightspeed EI plasma 2 which BOTH need MAP plumbing.
Does anyone have a good link to show how others have split it and where they mounted the dynon map kit? I have heard you can restrict it...dont want to restrict it, just use a 1/4 t etc? Anyone have the skinny on best practices to do this neat and efficiently?
I am thinking of using the vans firewall pass through, and then, inside the cabin mounting the dynon manifold pressure sensor and t'ing off to feed the lightspeed box. Good idea or bad? Most seem to mount sensor on the engine side of firewall..not sure why.
Thanks.
I have the vans MAP hose and firewall kit but am using both Dynon skyview and Lightspeed EI plasma 2 which BOTH need MAP plumbing.
Does anyone have a good link to show how others have split it and where they mounted the dynon map kit? I have heard you can restrict it...dont want to restrict it, just use a 1/4 t etc? Anyone have the skinny on best practices to do this neat and efficiently?
I am thinking of using the vans firewall pass through, and then, inside the cabin mounting the dynon manifold pressure sensor and t'ing off to feed the lightspeed box. Good idea or bad? Most seem to mount sensor on the engine side of firewall..not sure why.
Thanks.
Last edited: