[hydroguy2]

Ok my search technique needs refined or something. I spent the last 45 minutes searching ACspruce and VAF for info on MAG hold down clamps. I have two, but need two more to finish installing my Emag/Pmag combo. I think Slicks use the same.

Where do I get them? Anyone have a couple spare ones they could part with?

 

[az_gila]

Some here...

Ok my search technique needs refined or something. I spent the last 45 minutes searching ACspruce and VAF for info on MAG hold down clamps. I have two, but need two more to finish installing my Emag/Pmag combo. I think Slicks use the same.

Where do I get them? Anyone have a couple spare ones they could part with?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280400329896&viewitem=

 

[apkp777]

I ordered mine when I ordered the P-mags from emag.

 

[RV6_flyer]

Lycoming part number

Lycoming part number is: 75965

http://www.texasairsalvage.com/main_view.php?editid1=31458

Alternate part numbers are: LW-18378

 

[WenEng]

A newer part is also available... 66M19385

Here is an example from Texas Air Salvage Website.... $15.00 The picture shows the older LW 18378.

http://www.texasairsalvage.com/main_view.php?editid1=31458

Skyranch website site shows a picture of both the older one and the newer one.

http://www.sacskyranch.com/eng410.htm

 

[apkp777]

Emag charged me $16 a piece for them.

 

[hydroguy2]

thanks everybody

nice to wake up to the answer.

 

[Jamie Aust]

Hi Brian,

I had the same problem when I fitted my plasma II.

I just went to my engine build shop at the airport, they gave me 2 used ones for free

 

[PIN 37]

That is surprising that you had to chase those clamps up, mine were supplied with my Plasma III kit.

 

[hydroguy2]

I bought my emag/pmag used, and received 2 clamps. I emailed the guy who built my engine and he has a bunch.....they are on their way "no charge".