[Low Pass]

Anyone know where I can get aluminum countersunk washers for a number 8 flat head screw? I can find them for #10, 1/4", etc. Just not number 8. I don't want pressed stainless.

I came into about 50-60 of these with some surplus hardware I obtained and they work excellent for my application (securing fiberglass parts), but I'd like more. Hoping to not have to machine my own.

Thanks

 

[cajunwings]

Washers

SkyBolt structural washers?

Don Broussard
RV9 Rebuild in Progress
57 Pacer

 

[Low Pass]

Don, thanks for the tip. What I found at skybolt wasn't the same. Hope that prop's (close to) working for you. Looks like I'll have to make my own

Bryan

 

[Secondwind]

Check with McMaster Carr. If anyone will have them it will be them.

 

[jrock836]

Don, thanks for the tip. What I found at skybolt wasn't the same. Hope that prop's (close to) working for you. Looks like I'll have to make my own

Bryan

In a different thread when I asked about different washer options, someone sent me a link to these photos. Wish I had the machine to make them. Works of art for sure!

https://www.dropbox.com/sh/49ialxn7q69v90x/AAAqfKQaJ5jMsDg21vBQbixca/fairing washer?dl=0


https://vansairforce.net/community/showthread.php?t=193497&highlight=Cowling