Cfrisella Well Known Member Dec 10, 2009 #1 I have a new io-360 and need to know if the two nuts which secure the mags use standard torgue values or something special.
I have a new io-360 and need to know if the two nuts which secure the mags use standard torgue values or something special.
W WenEng Well Known Member Patron Dec 10, 2009 #2 Here is an example of Lycoming Instructions.. http://www.lycoming.textron.com/support/publications/service-instructions/pdfs/SI1508B.pdf It says torque the STD1410 nut to 17 ft lbs and use new STD475 internal teeth lock washers. Don't know which engine you have but hope this helps.
Here is an example of Lycoming Instructions.. http://www.lycoming.textron.com/support/publications/service-instructions/pdfs/SI1508B.pdf It says torque the STD1410 nut to 17 ft lbs and use new STD475 internal teeth lock washers. Don't know which engine you have but hope this helps.