I'm working on a "special" O2 system, and need to find an Oxygen-safe first stage regulator that will screw onto a standard CGA-540 valve (typical Aerox portable bottle) and put out from 50 - 100 psi through a standard pipe-thread-type fitting (to which I can connect a medium pressure hose).
Searching the 'net is tedious with these requirements - we've got so many folks here on VAF, I figure that someone might pop up and say "hey, I make those!"![Wink ;) ;)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
{Once I have the 50-100 psi O2, I'll pipe it to a second-stage diluter/demand regulator that I already have. I have used a borrowed bottle/reg for the front end of this before, but that isn't always available to me, so I want to roll my own that will work with bottles I have for our canula systems.}
Paul
Searching the 'net is tedious with these requirements - we've got so many folks here on VAF, I figure that someone might pop up and say "hey, I make those!"
{Once I have the 50-100 psi O2, I'll pipe it to a second-stage diluter/demand regulator that I already have. I have used a borrowed bottle/reg for the front end of this before, but that isn't always available to me, so I want to roll my own that will work with bottles I have for our canula systems.}
Paul