1. Where have you all who have the Plasma II mount the control unit? Does it matter if it is oriented horizontally or vertically?
2. The instructions say to wire the unit directly to the battery (no intermediate bus) Is it okay to wire it to the stud on the battery bus or do you guys run a wire all the way back to the battery terminals? If you do run it back to the terminals, what is the best way to secure it along the run? if it is wrapped to the large battery cable what is the best thing to wrap it with on the engine side of the firewall?
3. On the the input diagram it appears pins 7 & 8 are combined together and pins 14 &15 are also wired together. Is it best to run both wires for each set of pins together and combine them at the battery or do you jumper the pins at the connector and run a single wire to the battery? Or am I understanding the schematic for these pins incorrectly? Here is a link to it: http://www.lightspeedengineering.com/Manuals/InputDiagram.htm
Thanks for any help you can provide.
Matt
2. The instructions say to wire the unit directly to the battery (no intermediate bus) Is it okay to wire it to the stud on the battery bus or do you guys run a wire all the way back to the battery terminals? If you do run it back to the terminals, what is the best way to secure it along the run? if it is wrapped to the large battery cable what is the best thing to wrap it with on the engine side of the firewall?
3. On the the input diagram it appears pins 7 & 8 are combined together and pins 14 &15 are also wired together. Is it best to run both wires for each set of pins together and combine them at the battery or do you jumper the pins at the connector and run a single wire to the battery? Or am I understanding the schematic for these pins incorrectly? Here is a link to it: http://www.lightspeedengineering.com/Manuals/InputDiagram.htm
Thanks for any help you can provide.
Matt