I purchased a RV4 which is currently apart. I wanted to know if anyone knew the length of the 4 without the engine and rudder? I am hoping I can fit it in a 16' box truck.
My sideview drawing (#26) shows the length of the fuse - from FW to centerline of aft most bulkhead, to be 167 13/16" = 13.98'. To that you would have to add the length of the TW spring/TW assembly, which is approximately 2' (Drwg. 30).
So the measurements says it will fit with .02' to spare (a whole 1/4"!)- but the reality of it might be something else?
Be careful to measure width of box truck door if the horizontal is still on. We trailered a 4 back in a 20ft enclosed trailer earlier this year, no problem but did have to remove tail due to width. Engine was still attached and prop.
Be careful to measure width of box truck door if the horizontal is still on. We trailered a 4 back in a 20ft enclosed trailer earlier this year, no problem but did have to remove tail due to width. Engine was still attached and prop.