R

Romeo Victor

Member
Hi fellows,
does anyone have the drawing for the leading edge landing light cutout? I had them when I started but have to renew that part due to a taxi incident.

May be as pdf.



Thanks in advance

Stephan

PH-LRV
AOG
 
Is this what you are looking for? You didn't say what aircraft. This is for RV-4/6/7/8.

It doesn't say in these instructions but the FAQs on the Duckworks site say to mount these lights in the most outboard bay only, for structural and lighting performance reasons.
.
.
 

Attachments

  • Duckworks install instructions RV-4 6 7 8.pdf
    517.9 KB · Views: 243
Last edited:
The pattern will vary with the model. If you're using Duckwork's assembly, contact them for the pattern - it should have been included in their kit. If it's another vendor, best to ask them.

Dave
 
If anybody needs a 1:1 scale template for the Duckworks cut out for an RV-3/3B wing I have it in CAD and could provide it as a PDF file.

The reason they are different by model is the leading edge radius varies somewhat by model.

Jim
 
Stephan. No problem. I will send you one. But keep in mind this is for the RV-3 which has a tighter leading edge radius.

PM me your email address.
 
Last edited:
You must log in or register to reply here.