D dbren Member Jun 23, 2020 #1 Just a quick question, on the RV-14a leading edge of the rudder, do those blind rivets require a dimple?
Just a quick question, on the RV-14a leading edge of the rudder, do those blind rivets require a dimple?
M msmst25 Well Known Member Jun 23, 2020 #2 Dimple This may not be helpful, but the RV-10 leading edge did not require a dimple. If it doesn?t use the CS rivets, then you shouldn?t need a dimple. I believe the -10 used LP rivets with no dimple.
Dimple This may not be helpful, but the RV-10 leading edge did not require a dimple. If it doesn?t use the CS rivets, then you shouldn?t need a dimple. I believe the -10 used LP rivets with no dimple.
Jetmart Well Known Member Jun 23, 2020 #3 dbren said: Just a quick question, on the RV-14a leading edge of the rudder, do those blind rivets require a dimple? Click to expand... Just did mine, they are not dimpled. If your ever unsure look at the rivet call out to confirm.
dbren said: Just a quick question, on the RV-14a leading edge of the rudder, do those blind rivets require a dimple? Click to expand... Just did mine, they are not dimpled. If your ever unsure look at the rivet call out to confirm.