Jesse Well Known Member Feb 5, 2013 #1 I just updated my Dynon to a Skyview and the fuel flow needs a K-factor. I know they are all different, but does anybody remember what theirs is so I can use it as a starting value for ours? It's the old style, not the cube.
I just updated my Dynon to a Skyview and the fuel flow needs a K-factor. I know they are all different, but does anybody remember what theirs is so I can use it as a starting value for ours? It's the old style, not the cube.
Ron Lee Well Known Member Feb 5, 2013 #2 For my RMI system, the instructions say that for a 201B unit, it is around 2800 for 0.1 gallon. If I remember, I will check tomorrow when it is not dark and scary in the hangar.
For my RMI system, the instructions say that for a 201B unit, it is around 2800 for 0.1 gallon. If I remember, I will check tomorrow when it is not dark and scary in the hangar.
az_gila Well Known Member Feb 5, 2013 #3 This might help... http://www.floscan.com/html/blue/aviation.php Start with 29,500...
Sam Buchanan been here awhile Feb 5, 2013 #4 I ended up with 35000 for a 201B driving the fuel computer in the Trio Pro Pilot.