O olderthandirt Well Known Member Feb 8, 2016 #1 So after Canopy is riveted in and fiber glassed over rivets etc. what if the canopy needed to be replaced??
So after Canopy is riveted in and fiber glassed over rivets etc. what if the canopy needed to be replaced??
Mel Legacy Member Mentor Feb 8, 2016 #2 You cut out the fiberglass and drill out the rivets. Been done lots of times.
R RV Jerry Well Known Member Feb 9, 2016 #3 fairing i make all of my fairings removable, they are laid up over a taped off canopy with release wax then removed finished and installed with screws ,looks good when done
fairing i make all of my fairings removable, they are laid up over a taped off canopy with release wax then removed finished and installed with screws ,looks good when done
S sjhurlbut Well Known Member Feb 9, 2016 #4 Done Did it with Sikaflex. Complete replacement. Piece of cake.