Yeah, and it only took me about 5 seconds for Dan's site to catch a mistake I made on the seat backs. I cut all the .125 angle to length and was ready to go to town on drilling. In fact, I'd already drilled the side angles to the seat backs and was just about to start the top and bottom cross pieces.

Then, as I was about to drill on the workbench, I thought "I wonder if Dan's site is back up," so I put the drill down and went to look and, surprise, there it was.

Scroll to the page on building seatbacks and he made a reference to the .063 angle. Oh, oh. Back to the plans.....d'oh! The cross pieces are NOT .125, they're .063.

So I made up the new ones.

Gotta buy that CD.
 
You must log in or register to reply here.