Brantel
Well Known Member
I have my FF transducer mounted and plan on doing the following to connect it to the Gascollator. ( I will use two straight fittings and make a U shaped piece of tubing to connect it up, see the red line)
Anyone see any issues with this?
The stock hose that Van's provides in the FWF kit seems to work perfectly with this 45? fitting.
I want to connect/mount the primer solenoid on the other side of the gascollator with a steel male to male NPT fitting and a steel 1/4" to 1/8" reducing bushing.
This is all comming out pretty close to my ANL and Shunt blocks but I think it will all work out OK.
Anyone see any issues with this?
![2.jpg](/community/proxy.php?image=http%3A%2F%2Fi279.photobucket.com%2Falbums%2Fkk133%2Fbrantel%2Ftest%2Ffuel%2F2.jpg&hash=56958ccafbeeca7ab356fd1367ad68ba)
The stock hose that Van's provides in the FWF kit seems to work perfectly with this 45? fitting.
![DSCN7363.jpg](/community/proxy.php?image=http%3A%2F%2Fi279.photobucket.com%2Falbums%2Fkk133%2Fbrantel%2Ftest%2Ffuel%2FDSCN7363.jpg&hash=ba3d7754c60547ada10ee7896fd4e1cd)
I want to connect/mount the primer solenoid on the other side of the gascollator with a steel male to male NPT fitting and a steel 1/4" to 1/8" reducing bushing.
![DSCN7366.jpg](/community/proxy.php?image=http%3A%2F%2Fi279.photobucket.com%2Falbums%2Fkk133%2Fbrantel%2Ftest%2Ffuel%2FDSCN7366.jpg&hash=4176a486e6f782e21301d4b81d9a7408)
This is all comming out pretty close to my ANL and Shunt blocks but I think it will all work out OK.
![DSCN7361.jpg](/community/proxy.php?image=http%3A%2F%2Fi279.photobucket.com%2Falbums%2Fkk133%2Fbrantel%2Ftest%2Ffuel%2FDSCN7361.jpg&hash=6273fbba8c556d22f4743447412545c6)