Davepar
Well Known Member
I made my own ground block by riveting the tabs that SteinAir sells to a piece of spare .063 sheet aluminum. Total cost $3. I was pretty happy with myself until I started to wonder if this was such a good idea. Will the brass tabs and aluminum react with each other? Should I just throw some dielectric grease on there? I ran across Amit's article which looks like a very similar approach.
Picture (kind of fuzzy):
Installed:
Dave
Picture (kind of fuzzy):
![IMG_4560.jpg](/community/proxy.php?image=http%3A%2F%2Fwww.dualrudder.com%2Falbums%2Frv7%2Fimages%2FIMG_4560.jpg&hash=f59bf2bd1421df4e56a4de869714c6b3)
Installed:
![IMG_0264.jpg](/community/proxy.php?image=http%3A%2F%2Fwww.dualrudder.com%2Falbums%2Frv7%2Fimages%2FIMG_0264.jpg&hash=4ae28f3bccefc6e2dba061ccf458b750)
Dave