[777drvr]

Does anyone have a DXF or a diagram for a 3 1/8" VSI etc that has 3 mounting bolts and a a cutout at the 7:30 position ?

Thanks,
Marc

 

[Lars]

Does anyone have a DXF or a diagram for a 3 1/8" VSI etc that has 3 mounting bolts and a a cutout at the 7:30 position ?

Thanks,
Marc

How about this?

 

[frankh]

Yes

Lots of dimensioned drwgs on the web. Just draw it in autocad. If you put the center point of the big hole in, you can plot to full size and glue to the panel to drill out by hand.

 

[777drvr]

Hi Guys,

Using a drawing I found on the Interweb and a VSI I had on hand , I was able to come up with an accurate drawing .

If anyone needs the DXF , just shoot me a PM.

Marc

 

[pazmanyflyer]

Hi Guys,

Using a drawing I found on the Interweb and a VSI I had on hand , I was able to come up with an accurate drawing .

If anyone needs the DXF , just shoot me a PM.

Marc

I have one (older) in my cad library. You found one before I read this, but I'd like to see yours or where you found it (website). You can email to carlosh at sec-engr dot com

 

[777drvr]

comin atcha . I printed it out and it fits around the bump nicely.

Marc