Dayton Murdock
Well Known Member
Hi Guys
Today I started the engine installation. I had to turn my airframe around in the hanger and move something?s around. I browed an engine hoist and 30 minutes later a had the case bolted on.( the cylinder are out for overhaul) to the engine mount. The first thing to work on was the throttle cable. I used the ball type penetration thru the firewall. I drilled the aluminum ball section to accommodate the cable diameter.
Today I started the engine installation. I had to turn my airframe around in the hanger and move something?s around. I browed an engine hoist and 30 minutes later a had the case bolted on.( the cylinder are out for overhaul) to the engine mount. The first thing to work on was the throttle cable. I used the ball type penetration thru the firewall. I drilled the aluminum ball section to accommodate the cable diameter.
![10003965gx.jpg](/community/proxy.php?image=http%3A%2F%2Fimg291.imageshack.us%2Fimg291%2F6269%2F10003965gx.jpg&hash=8187f87e46c7df95c27b3540222c9c6c)
![10003985rz.jpg](/community/proxy.php?image=http%3A%2F%2Fimg291.imageshack.us%2Fimg291%2F3127%2F10003985rz.jpg&hash=10c675e5dec3331e11f1bea70620bd0c)
![10003999xl.jpg](/community/proxy.php?image=http%3A%2F%2Fimg291.imageshack.us%2Fimg291%2F2572%2F10003999xl.jpg&hash=6e668ef874adda86abd535613fa94b36)