Working on the left wing wiring. Got to the steps where I put the ES-00079 floating connector pins onto several wires. They are then supposed to plug into the blue electrical connector block ES-0078 (for left wing). I am wondering about how the connector pins are oriented when they are placed into the connector block. I don't see anything that says anything about this and I don't want to push them in the way I think they go for fear of getting them in wrong and then not being able to get them back out. The pin itself is not symmetrical. The diagram is clear as to where they go in the back of the connector just not if there is any specific rotation on the pin when it is put in. Is there a trick to putting these in. Will they go in either way or will they only go in one way? Figured that I would ask before I make a mistake!