MikeBFlyer
I'm New Here
I've got an idea for a very simple and inexpensive electric flap system and would like to gauge interest. Seems that the electric flap setup from Vans is a bit pricy and I'm not aware of a good quality but inexpensive alternative. Here's the concept:
Electric flap actuator, position indicator and all hardware
Weight: 2-3 lbs
Cost: less than $300 for everything.
Two control options and indicator options
Three position (move up, move down, stop) switch and LED bar graph position indicator
OR
Four position (retract, 10 deg, 20 deg, full down) switch with LED status/position indicator.
This type of system from Vans as far as I can tell is around $600 if you want the indicator and actuator.
Would this be of interest to anyone?
Electric flap actuator, position indicator and all hardware
Weight: 2-3 lbs
Cost: less than $300 for everything.
Two control options and indicator options
Three position (move up, move down, stop) switch and LED bar graph position indicator
OR
Four position (retract, 10 deg, 20 deg, full down) switch with LED status/position indicator.
This type of system from Vans as far as I can tell is around $600 if you want the indicator and actuator.
Would this be of interest to anyone?