cderk
Well Known Member
I'm pretty embarrassed about this but for the life of me, I cannot figure out how to drive these rivets. Nothing I have at my disposal can get into this tight location. I've driven at least 8 rivets into these three holes On my vertical stabilizer and each time I have to remove it. Now the holes are a little larger and I'm thinking I need a new inspar rib.
I have a 3x rivet gun and a pneumatic squeezer.
![](/community/proxy.php?image=http%3A%2F%2Fi1308.photobucket.com%2Falbums%2Fs605%2Fcderk%2FA579274C-8BE6-4EC7-86CF-782E1C5FA83B_zpsw0y0uoft.jpg&hash=e503d71d6b64ca74dfbd66846745e2b4)
Any suggestions for a newbie who obviously needs to put this down for the day and have a few beers.
Thanks
Charlie
I have a 3x rivet gun and a pneumatic squeezer.
![](/community/proxy.php?image=http%3A%2F%2Fi1308.photobucket.com%2Falbums%2Fs605%2Fcderk%2FA579274C-8BE6-4EC7-86CF-782E1C5FA83B_zpsw0y0uoft.jpg&hash=e503d71d6b64ca74dfbd66846745e2b4)
Any suggestions for a newbie who obviously needs to put this down for the day and have a few beers.
Thanks
Charlie