I am having trouble getting the ilevil 2 SW to send the ADS-B data to the GRT EFIS.
iLevil is configured for GDL90 protocol
I have the iLevil AUX0 Port configured for DATA OUT (is this correct)?
I am using the RS 232 TX line from the ilevil to the RX 232 Port 5 in the GRT EFIS.
Does the iLevil communicate at 230400 Baud rate ?
I have the GRT EFIS set to receive ADS-B
Using Port 5 RX
Baud rate is set at 230400 (per ilevil communication rate found on the internet as I can not get in touch with them)
Can anyone shed some light on the correct baud rate and proper settings of the ilevil unit. Do I need a ground from the ilevil to the EFIS? I have tried contacting ilevil by email, telephone and through there FAQ page for several weeks, multiple attempts! They have the worst customer service I have ever dealt with!
Any help would be greatly appreciated. I am hoping one of you guys has an ilevil for ADS-B in a GRT or other EFIS.
Thanks in advance
iLevil is configured for GDL90 protocol
I have the iLevil AUX0 Port configured for DATA OUT (is this correct)?
I am using the RS 232 TX line from the ilevil to the RX 232 Port 5 in the GRT EFIS.
Does the iLevil communicate at 230400 Baud rate ?
I have the GRT EFIS set to receive ADS-B
Using Port 5 RX
Baud rate is set at 230400 (per ilevil communication rate found on the internet as I can not get in touch with them)
Can anyone shed some light on the correct baud rate and proper settings of the ilevil unit. Do I need a ground from the ilevil to the EFIS? I have tried contacting ilevil by email, telephone and through there FAQ page for several weeks, multiple attempts! They have the worst customer service I have ever dealt with!
Any help would be greatly appreciated. I am hoping one of you guys has an ilevil for ADS-B in a GRT or other EFIS.
Thanks in advance