G gfree I'm New Here Mar 28, 2010 #1 Well, I was working on HS-702 and I ended up removing too much material! ****! If I continue the relief hole will end up extending beyond the bend. The second HS-702 I trimmed ended up a lot better. Looks like I'm ordering another HS-702.
Well, I was working on HS-702 and I ended up removing too much material! ****! If I continue the relief hole will end up extending beyond the bend. The second HS-702 I trimmed ended up a lot better. Looks like I'm ordering another HS-702.
larrynew Well Known Member Mar 28, 2010 #2 Extra HS-702 I too have an extra HS-702. Same problem. Learned then to test fit first before blindly trusting dimensions on the plans when ever possible.
Extra HS-702 I too have an extra HS-702. Same problem. Learned then to test fit first before blindly trusting dimensions on the plans when ever possible.
L lorne green Well Known Member Mar 28, 2010 #3 HS-702 I think Van's should ship two of these with every kit. It's the first part I had to reorder because of an edge distance issue.
HS-702 I think Van's should ship two of these with every kit. It's the first part I had to reorder because of an edge distance issue.
G gfree I'm New Here Mar 28, 2010 #4 Well on the plus side, I have lots of scrap now to try all kinds of things out on.