DanB
Active Member
Funny topic I know, however, a collegue of mine and I have a debate going on and I am looking for a consensus. We are both Industrial Arts (Tech) teachers so neither of us want to fold on this one. I figured RV builders would know all about loading up files and cleaning them out...so... here are the two possibilities:
A:One of us was taught to clean a loaded file by taking the file card and brushing the file in the direction that the cleaning wires are already bent over...hence...not to bend the wire over backwards.
B:The other option is to pull the wire ends through in an effort to "catch" the loaded material with the ends of the wire. ruffeling the wire feathers if you will.
File experts of the world...we are awaiting your votes
Thanks,
Dan B, Mesa, AZ
A:One of us was taught to clean a loaded file by taking the file card and brushing the file in the direction that the cleaning wires are already bent over...hence...not to bend the wire over backwards.
B:The other option is to pull the wire ends through in an effort to "catch" the loaded material with the ends of the wire. ruffeling the wire feathers if you will.
File experts of the world...we are awaiting your votes
Thanks,
Dan B, Mesa, AZ
Last edited: