I want to double check my second hand (bought the project) tanks for bubbles before painting. My concern is no access to the rear, so they must come off.
I am aware to put thin a sheet under the dimpled flanges to lift the dimple. My problem is the curved seams ( top and bottom ) are pretty stubborn. My idea is to rotate the the tank from the fuse end to walk it off the curved edges without distorting something. These joints are really tight. Nice workmanship, but there is downside.
Advice appreciated.
I am aware to put thin a sheet under the dimpled flanges to lift the dimple. My problem is the curved seams ( top and bottom ) are pretty stubborn. My idea is to rotate the the tank from the fuse end to walk it off the curved edges without distorting something. These joints are really tight. Nice workmanship, but there is downside.
Advice appreciated.