dsmithlib
Active Member
I am trying to attach my C728 Ball Stud Aft Mount to the Aft Canopy Deck with #8 screws as depicted in the attached drawing snipet from my RV7 tipup.........
The aft deck is attached and so I am unable to get wrenches or sockets up there to hold the 11/32" nuts. I guess this is one of those things I should have done before attaching the Aft Deck ! ?
Is there a tool that can be used?
Is there a blind rivet strong enought to replace the AN509-8R12 screws?
My goal was to see my tipup....TIP UP.... before heading to Osh....
Ideas appreciated.....
![ballstudattachmentsmallbf9.jpg](/community/proxy.php?image=http%3A%2F%2Fimg212.imageshack.us%2Fimg212%2F4831%2Fballstudattachmentsmallbf9.jpg&hash=d7b8a78d0e279ab9d6f4787efe927069)
The aft deck is attached and so I am unable to get wrenches or sockets up there to hold the 11/32" nuts. I guess this is one of those things I should have done before attaching the Aft Deck ! ?
Is there a tool that can be used?
Is there a blind rivet strong enought to replace the AN509-8R12 screws?
My goal was to see my tipup....TIP UP.... before heading to Osh....
Ideas appreciated.....