mikedelta137
Member
I recently had to order replacement skins for my horizontal stabilizer, hs-601pp. When getting ready to put the new skins on I realized the holes did not line up.
[/URL][/IMG]
This is where the 702 spar meets the inboard rib.
here is a pic from the side, you can see the hole is about 1/4 lower than the holes in the spar and rib.
[/URL][/IMG]
Here is the old skin, all the holes are in an even line
[/URL][/IMG]
Every other hole in the skins match up perfect. Has anyone ran into this? The kit is from 2007 so maybe something has changed from then. Any thoughts/suggestions.
This is where the 702 spar meets the inboard rib.
here is a pic from the side, you can see the hole is about 1/4 lower than the holes in the spar and rib.
Here is the old skin, all the holes are in an even line
Every other hole in the skins match up perfect. Has anyone ran into this? The kit is from 2007 so maybe something has changed from then. Any thoughts/suggestions.