[URL=http://s1207.photobucket.com/user/Thoma015/media/Mobile%20Uploads/RV-7%20Build%20Emp/IMG_20151214_175709182.jpg.html][/URL]
What you are looking at is the forward spar. Take a look at the lower (actually upper, but the piece is flipped) splice angle and you can see my screw up. The far left top hole was after I drilled from the back and got too close to the edge.
I then drilled the lower hole, can i salvage this and use the second lower hole next to the bad hole?
Here is a picture of the other side
[URL=http://s1207.photobucket.com/user/Thoma015/media/Mobile%20Uploads/RV-7%20Build%20Emp/IMG_20151214_175656631_1.jpg.html][/URL]
What you are looking at is the forward spar. Take a look at the lower (actually upper, but the piece is flipped) splice angle and you can see my screw up. The far left top hole was after I drilled from the back and got too close to the edge.
I then drilled the lower hole, can i salvage this and use the second lower hole next to the bad hole?
Here is a picture of the other side
[URL=http://s1207.photobucket.com/user/Thoma015/media/Mobile%20Uploads/RV-7%20Build%20Emp/IMG_20151214_175656631_1.jpg.html][/URL]