[N62XS]

I am looking for a snorkel airbox diagram or the Vans Part # for the multiple angle(W angle) that is used to retain the K & N filter at the top or the airbox and for the part # of the front baffle part(pilot side) that wraps underneath the cylinders.

 

[rzbill]

Robby,
I'm not in a position to scan and send the whole parts list but you might get one from Vans if you ask.

The whole kit is titled "FAB-HORIZ INDUCTION-1 IO-360 180/200 HP"
Mine is noted as Jan 22, 2009 vintage (for revision purposes)

Glass Snorkel is VA-132-1

The "W" piece the does the sides is VA-132-1A.
It is cut in half to make the left and right sides.

The back "W" next to the cylinder is VA-132-1B.
The dimensions of its "W" bend are slightly different than the -1A part.

The top filter retainers are -1C and -1D


#2 lower baffle (from the baffle kit OP-40, not the intake kit) is CB-1002A

There are other parts connected to it (when finished) such as:
CB-1002B
CB-1002C
CB-1002D
CB-1002G
CB-702E
CB-702M

 

[N62XS]

Thanks

Thanks Bill! Having to rebuild mine after a "Builder's Assitance" operation cracked one of the "W" pieces. I saw it on your web site. Thanks again.

 

[Jerry Cochran]

Pretty sure Van's has the plan, as IIRC I had one during my build. If so they usually charge $5 for individual sheets.

Jerry

P.S. On another project I built it myself without benefit of plans so it can be done but a time consuming pain (for me).