[dweyant]

Working on installing the Harnesses in my RV-14A.

Hooker has installed a bushing in the lap belt portion of the harness. To use that I'll have to pull the attach points apart a decent amount.

Is it better to do that, or to drill out the Hooker bushing and make my own?

I.e. how is everyone else installing the harnesses?

Thanks,

-Dan

 

[Becssc]

I ended up using a Dremel and sanding down the bushings on both sides until barely wider than the belt attachment. Still a tight fit but very manageable.

 

[jeffreyuh60]

I called Hooker and asked them how it should be installed and went with that.

 

[dweyant]

I called Hooker and asked them how it should be installed and went with that.

Care to share what they said?

-Dan