[rvholic]

Friends, does any one know where to install a 3/4 inch metal plug that come in the FF kit. For sure is to cover a 3/4 inch hole, but wich one?

thanks in advance

 

[Steve]

"A" model?

On the lower firewall to plug the nose wheel strut bolt access hole.
Steve

 

[Rick6a]

Friends, does any one know where to install a 3/4 inch metal plug that come in the FF kit. For sure is to cover a 3/4 inch hole, but wich one?

thanks in advance

Maybe. I believe the plug is used to cover a clearance hole drilled through the firewall (per plans) opposite the bolt that attachs the nose gear leg to the mount. I avoided drilling that 3/4" hole by beveling the threads and clocking the bolt so that it just clears the firewall without actually touching it.

 

[rvholic]

thanks

Thanks Rick and Steve
I am finishing a -6 so I will save quarter oz weigth
Gearado Urich

 

[az_gila]

Not in the plans...

Thanks Rick and Steve
I am finishing a -6 so I will save quarter oz weigth
Gearado Urich

That's OK since the 3/4 hole in the firewall isn't in the original -6 plans....

gil A