Hi all I've pulled my cylinders to install new 9:1 pistons and rings. Only problem is the logbook was missing when I purchased this engine. I've already overhauled the lower end but figured I would freshen the cylinders now. I've already did a valve job to the cylinders and now it's time to hone and add the new pistons and rings. Now to the problem, my cylinder has both a blue strip and a orange stripe. Can someone identify this cylinder as chrome or nitride so I can be sure to purchase the proper rings. The cylinders are standard size and measure fine with the dial bore gauge.
Thanks
Bill
![](/community/proxy.php?image=http%3A%2F%2Fi1120.photobucket.com%2Falbums%2Fl489%2FStangman777%2Fimage_zps49d39352.jpg&hash=501b2614082e2163aea5f8c5ca4a7396)
![](/community/proxy.php?image=http%3A%2F%2Fi1120.photobucket.com%2Falbums%2Fl489%2FStangman777%2Fimage_zps3f800abb.jpg&hash=594cf3b081af5eb4a2e355bf6ea91c2e)
![](/community/proxy.php?image=http%3A%2F%2Fi1120.photobucket.com%2Falbums%2Fl489%2FStangman777%2Fimage_zps817a5371.jpg&hash=fc46cb1fceba290f51aa0e2209e9067a)
Thanks
Bill
![](/community/proxy.php?image=http%3A%2F%2Fi1120.photobucket.com%2Falbums%2Fl489%2FStangman777%2Fimage_zps49d39352.jpg&hash=501b2614082e2163aea5f8c5ca4a7396)
![](/community/proxy.php?image=http%3A%2F%2Fi1120.photobucket.com%2Falbums%2Fl489%2FStangman777%2Fimage_zps3f800abb.jpg&hash=594cf3b081af5eb4a2e355bf6ea91c2e)
![](/community/proxy.php?image=http%3A%2F%2Fi1120.photobucket.com%2Falbums%2Fl489%2FStangman777%2Fimage_zps817a5371.jpg&hash=fc46cb1fceba290f51aa0e2209e9067a)