skyking902001
Well Known Member
Ok guys, about to admit the baggage door has beaten me . This is the second door I've built and it is only marginally better than the first. I've read every thread on the board regarding the door and just can't find a magic potion. The fit is quite good everywhere except in the tight curve, both the fore and aft edge stick up about 1/32". I marked the areas in blue--I can push the aft portion of the door down flush. The forward portion can be pushed down almost flush. I'm thinking I need to shrink the skin in these areas but not really sure. Is there anyone in the Dallas/Fort Worth area where I could get some help fitting this door? Thanks in advance.