I'm almost done with my RV-14A aft fuselage, and am thinking about how to store it. My plan is to hang it horizontally, and upside down, from my garage ceiling. I'm thinking that I'll install an eyebolt in the tiedown bracket, and use that to suspend the aft end of the tailcone. I'm unsure of the best/easiest/"good enough" way to suspend the forward end, without fear of damaging the skins, etc.
It seems that I can just use rope around the fuse, with a loop on the top for a hook, and something between the rope and skin to prevent scuffing (thin packing foam? towels?). I'd center the rope at the forward-most F-01407 bulkhead, and do something to keep it there (duct tape?).
Do you see anything I should be concerned about with this strategy? Would you recommend that I do something different?
It seems that I can just use rope around the fuse, with a loop on the top for a hook, and something between the rope and skin to prevent scuffing (thin packing foam? towels?). I'd center the rope at the forward-most F-01407 bulkhead, and do something to keep it there (duct tape?).
Do you see anything I should be concerned about with this strategy? Would you recommend that I do something different?