Brantel
Well Known Member
Just a note for those using the GTN series...
I found that the default Mic Gain was way to high for the LS Zulu microphone. The default is +12dB and this caused my setup to overmodulate and transmit too much ambient noise.
I reduced the gain to +6dB and the results were much better! I may even try a lower setting as well.
If you have a hot mic, you may want to reduce this gain setting.
I found that the default Mic Gain was way to high for the LS Zulu microphone. The default is +12dB and this caused my setup to overmodulate and transmit too much ambient noise.
I reduced the gain to +6dB and the results were much better! I may even try a lower setting as well.
If you have a hot mic, you may want to reduce this gain setting.