Stick.rudder
I'm New Here
I’m installing a GSA 28 servo on the R wing of my 7A using the RV-7/8/10 install kit. The stop bracket that comes with the servo overlaps with the mounting bracket, so that if the stop bracket is attached to the servo first, the servo will not lie flush with the mounting bracket. If the servo is attached to the mounting bracket first, the stop bracket will not lie flush to the servo. Should I trim away the overlapping portion of the mounting bracket, or shim the servo to the mounting bracket to account for the thickness of the stop bracket? Or am I missing something all together?
Gregg Larson
7A slider 74401
Paid
Gregg Larson
7A slider 74401
Paid