[shiney]

Does anyone have a picture of the fuel sender resistor wiring, just to help me check my work!

Thanks


Martin

 

[johngoodman]

No picture, but it's pretty straight forward. You EIS should have come with a couple of resistors (I can't remember the ohms). All you do is take the 4V power and splice into it. That wire will join with the Aux wire you have chosen and the resistor is downline from that.
John

 

[rv9av8tr]

GRT EIS Wiring

See my drawing here:
http://www.mykitlog.com/users/display_log.php?user=n539rv&project=161&category=4502&log=72792&row=9

See the bottom drawing.

 

[shiney]

thanks for the help

Thanks John, do you mean the 4V Excitation (blue) which is used by fuel pressure and Hall Effect ?

Mike, thanks for the pictures but couldn't read them, even after printing, my eyes are not what they once were!!

Martin

 

[DanH]

Using a terminal block is one way to do it.

 

[Mike S]

I did it just like Dan shows, at least the left side with the resistors, sorry dont have a photo.

Worked just fine.