Hi all. My shop seems to have changed some of the settings and they can't figure it out, but for some reason my amperage gets in the red at 9 amps load. Does anyone know the proper range for the amperage setting and where the red zone starts?
Also, my fuel pressure is reading as high as 17 or 18 psi and it should be 3.5, maxing our at 8, but the plane flies and response just fine so I'm trying to wrap my head around what might be the problem.
Also, my fuel pressure is reading as high as 17 or 18 psi and it should be 3.5, maxing our at 8, but the plane flies and response just fine so I'm trying to wrap my head around what might be the problem.