Av8torTom
Well Known Member
I was fitting the longerons and I positioned them about half inch too far aft. They should be lined-up with the flange of the F-712 bulkhead
![](/community/proxy.php?image=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj150%2Fav8tor215%2FRV-9A%2FB7659594-49AC-410C-A6DE-5E87BE971301_zpss5pwnp46.jpg&hash=f8d654ef293681df6fe76f24be439bf7)
So what's the collective wisdom of this forum. I can widen the notch I cut in the longeron that I made for the F-711C and slide the longeron forward half an inch, but will that impact strength? Make some sort of patch?
Thanks,
Tom
![](/community/proxy.php?image=http%3A%2F%2Fi271.photobucket.com%2Falbums%2Fjj150%2Fav8tor215%2FRV-9A%2FB7659594-49AC-410C-A6DE-5E87BE971301_zpss5pwnp46.jpg&hash=f8d654ef293681df6fe76f24be439bf7)
So what's the collective wisdom of this forum. I can widen the notch I cut in the longeron that I made for the F-711C and slide the longeron forward half an inch, but will that impact strength? Make some sort of patch?
Thanks,
Tom