RV7Guy
Well Known Member
I've been meaning to write this up for some time. Last Christmas I had seen the commercials for the Dremel Trio. Santa brought me one and I've been using it quite a bit lately. It is essentially a hand held router.
With the router bits it easily cuts aluminum. I cut holes in .063 with ease. Also cut holes for cup holders in a composite console I made. The cuts were quick and easy. For those who need to cut lots of holes for instruments and gauges you can do it much safer than the fly cutter or hole saw.
Take a look at this very versatile tool.
http://www.dremel.com/en-us/Tools/Pages/ToolDetail.aspx?pid=Dremel+Trio%e2%84%a2
With the router bits it easily cuts aluminum. I cut holes in .063 with ease. Also cut holes for cup holders in a composite console I made. The cuts were quick and easy. For those who need to cut lots of holes for instruments and gauges you can do it much safer than the fly cutter or hole saw.
Take a look at this very versatile tool.
http://www.dremel.com/en-us/Tools/Pages/ToolDetail.aspx?pid=Dremel+Trio%e2%84%a2
