S

SteveHRV7

Member
My 7a tail is done so while I am waiting for my QB 7a to finally arrive, I thought I would try to get up to speed on some of the building skills I will need when I start the wings and fuse. Are there any good A & P text books anyone would recommend that cover basics such as fluid lines, wiring, brakes, engine components etc. I have seen a lot of references to the Jeppesen A&P Technician General Textbook. Thoughts or recommendations? Are they worth it? (My wife says that my solution to any problem is to throw a book at it). :D Thanks !
 
AC 43-13-1b

Not much plot, but a reference you will use even after your project is flying.

John Clark
RV8 N18U "Sunshine"
KSBA
 
Good General Purpose...

...FAA document is old but still OK -

AC 65-15A, ADVISORY CIRCULAR, AIRFRAME & POWERPLANT MECHANICS AIRFRAME HANDBOOK (1976)., This handbook was developed and first printed in 1972 as one of a series of three handbooks for persons preparing for certification as an airframe or powerplant mechanic. It is intended that this handbook will provide basic information on principles, fundamentals, and technical procedures in the subject matter areas relating to the airframe rating. This volume contains information on airframe construction features, assembly and rigging, fabric covering, structural repairs, and aircraft welding.

-- and it's even available free on-line in PDF format here -

http://www.everyspec.com/FAA/FAA+-+AC+PUBS/download.php?spec=AC_65-15A.013477.pdf

The AC 65-9 which covers A&P general knowledge is now obsolete, but can be found on the FAA web site and is still worth browsing -

http://rgl.faa.gov/Regulatory_and_G...e3daac121862569f1005f80f1!OpenDocument&Click=

The AC 43.13 is also available on line here --

http://www.everyspec.com/FAA/FAA+-+AC+PUBS/AC_43_13-1B_13466/
 
Last edited:
Aeroelectric

Bob Nuckoll's "Aeroelectric Connection". (Also look on his site for other reference.)
 
You must log in or register to reply here.