clam Well Known Member May 5, 2014 #1 Anyone know if pin 21 and pin 25 (power in) can be from different sources? ie, is one primary and the other secondary? The schematic in the manual makes it appear these must be spliced from the same source.
Anyone know if pin 21 and pin 25 (power in) can be from different sources? ie, is one primary and the other secondary? The schematic in the manual makes it appear these must be spliced from the same source.
Walt Well Known Member May 6, 2014 #2 The load is shared between the 2 pins, they should be from the same source.