markelliott
Member
Does anyone know what the pin locations are for the LH wing harness to the CPC connectors? Specifically, shielded cable f-406. The diagram of wh-00125 shows 2 striped wires (gray/black and orange/black).
The green (ground) and red are obvious.
The next 3 wires from the drawing to real life are a mystery. Real life they are black, white/red and white/black.
Tracing back the diagram to the large d-sub is orange/black pin 8 - but I can't find what pin 8 is.
What cpc pin location should the white/red and white/black wires go?
thanks
Mark
The green (ground) and red are obvious.
The next 3 wires from the drawing to real life are a mystery. Real life they are black, white/red and white/black.
Tracing back the diagram to the large d-sub is orange/black pin 8 - but I can't find what pin 8 is.
What cpc pin location should the white/red and white/black wires go?
thanks
Mark
