HFS
Well Known Member
Here are some pics of one of my general shop tables built back in 1981:
Size: 4' x 8' Working Height: 36"
Fixed center section, with replaceable outer "wings" made from pre-made, melamine covered 12" shelving.
21 drawers
5" locking rollers
"umbilical" for electrical power & air
I replace the wings every six months or so (two uses for each wing), and refurbish & repaint the center section on condition.
YMMV - and probably will.
If I got the sequence right - pics should be: Before, During, & After
HFS
Size: 4' x 8' Working Height: 36"
Fixed center section, with replaceable outer "wings" made from pre-made, melamine covered 12" shelving.
21 drawers
5" locking rollers
"umbilical" for electrical power & air
I replace the wings every six months or so (two uses for each wing), and refurbish & repaint the center section on condition.
YMMV - and probably will.
If I got the sequence right - pics should be: Before, During, & After
HFS