polkaking27
Active Member
I just wired in my GDL50 using the bare wire connector) to my g3x touch. I decided to wire it in because whenever I connected via Bluetooth I wouldn’t receive traffic on my g3x.
Using the bare wire garmin connector and port 4602, I pinned the green wire to #29 and green/white to #13, then ran power and ground. When I power on the GDL turns on just fine.
What do I do from here??? I can’t find instructions ANYWHERE on how to configure the G3X to recognize the GDL50. Any advice or links to configuration instructions
Using the bare wire garmin connector and port 4602, I pinned the green wire to #29 and green/white to #13, then ran power and ground. When I power on the GDL turns on just fine.
What do I do from here??? I can’t find instructions ANYWHERE on how to configure the G3X to recognize the GDL50. Any advice or links to configuration instructions
