P PMLviator Active Member May 14, 2014 #1 22-02 step 3 fig.4 does not show what size nutplate and rivet to use. Am I missing something in reading the drawing?
22-02 step 3 fig.4 does not show what size nutplate and rivet to use. Am I missing something in reading the drawing?
B BigJohn Well Known Member May 14, 2014 #2 Could be wrong, but I don't think that nutplate is installed in this section.
M Mich48041 Well Known Member Friend May 14, 2014 #3 My 22-02 step 3 refers to figure 1, not figure 4. Joe Gores
P PMLviator Active Member May 15, 2014 #4 O.K. my rev.4 say's, callouts as per fig.1 and fig.4. Went ahead and found step 3 on 28-05 which calls for AN3-7, so I guess K1000-3. thanks.
O.K. my rev.4 say's, callouts as per fig.1 and fig.4. Went ahead and found step 3 on 28-05 which calls for AN3-7, so I guess K1000-3. thanks.
P PMLviator Active Member May 15, 2014 #6 gascolator nutplate YEP, there it is, steps 10, 11, 12. Thanks.