What do you do when the used GNS420 you bought didn't come with a tray? They are over $550 on Ebay
Answer:
Print one!
I'll fabricate the metal tube to support the front end and rivet it to this ABS housing. The connectors were over $100 for the pair. All in for plastic and sheet metal - ~$20. Of course, I spent the better part of Saturday modelling the housing in Solidworks.
Don
Answer:
Print one!
I'll fabricate the metal tube to support the front end and rivet it to this ABS housing. The connectors were over $100 for the pair. All in for plastic and sheet metal - ~$20. Of course, I spent the better part of Saturday modelling the housing in Solidworks.
Don